15-MINUTE FITTING INSTRUCTIONS

The ADVANCE-PRO can be used with or without the HEEL-PRO. Using both together is preferred for optimal clinical benefits, especially when body weight exceeds 160 lbs. or when severe pronation is present. When they are used together, the HEEL-PRO is placed under the ADVANCE-PRO. Both can be activated with water and fitted at the same time, or the HEEL-PRO can be activated with water and fitted any time after fitting the ADVANCE-PRO.
Inject 5-8 mL of tap water, depending on the size of the orthotics, through the opening of the black plastic tube on the back of the orthotics. NOTE: Make sure the plastic needle is fully inserted into the black plastic tube to prevent water from leaking.

DO NOT open the sealed package until ready to fit your patient

Follow the steps below to activate the ADVANCE-PRO and HEEL-PRO.

  • STEP 1

    MEASURE & TRIM the front end of the orthotics if needed. Remove factory insoles from the shoes and replace with Advance-Pro or Heel-Pro

  • STEP 2

    INJECT 5-8 ml of tap water, depending on the size of the orthotics, through the opening of the black plastic tube on the back of the orthotics. NOTE: Make sure the plastic needle is fully inserted into the black plastic tube to prevent water from leaking.

  • STEP 3

    WALK 3 MINUTES around to transfer the shape of your feet onto the orthotics.

  • STEP 4

    SIT 12 MINUTES in a comfortable position on a chair with feet flat on the floor and legs perpendicular to the floor to realign your feet & ankles back to neutral position.

HOW TO MAKE PROFESSIONAL ACCOMMODATIONS FOR HEEL-PRO

Custom Accommodations for pressure offloading or adding a cushion in specific areas can be made quickly in your office. Simply cut and remove the unwanted portions of the forefoot area on the Heel-Pro orthotics as shown in the pictures. Replace the Advance-Pro over the Heel-Pro to cover the accommodation areas.

INSURANCE BILLING INSTRUCTIONS FOR PROFESSIONALS

NOTE: Alternatively, you may inject water through thebottom of the orthotics using an 18-gauge needle. Some minimal amount of water leakage is normal. After Step 4, the pair is ready for long-term use and can be interchanged among shoes of the same style.

NOTE: According to coding descriptions, only orthotic shells made from laminated layers of carbon fiber may be billed to insurance under CODES L-3030 and L-3031.

  • Option 1: Billing CODE L-3030

    If Advance-Pro or Heel-Pro is used separately, only Code L-3030 may be billed to insurance.

    Fit the P.O.L. Advance-Pro directly to your patients using their own
    feet as the molds. No separate image or cast is required.

    Key Benefits of P.O.L. Advance-Pro:
    • Built-in metatarsal pad for added forefoot comfort and
    improved alignment.
    • Integrated heel spur relief reduces pressure under the heel —
    ideal for treating heel spurs and plantar fasciitis.

  • Option 2: BillingCODE L-3030 and L-3031

    If both Advance-Pro and Heel-Pro are used together, both codes L-3030 and L-3031 may be billed to insurance together.

    Key Benefits of Advance-Pro and Heel-Pro when used together.
    • Built-in metatarsal pad for added forefoot comfort and
    improved alignment.
    • Built-in heel spur relief pressure under the heel —
    ideal for treating heel spurs and plantar fasciitis.
    • Flat heel post for enhanced ankle support and stability.
    • Metatarsal bar adds cushioning under the ball of the foot to
    relieve pressure and prevent callus formation.

    CASH OPTION: $350 or more per combination pair.